[PD] pd on pi zero ?

Christof Ressi christof.ressi at gmx.at
Sat Sep 2 20:15:10 CEST 2017


wow, this sounds great! must try it out somehow.


Gesendet: Samstag, 02. September 2017 um 20:10 Uhr
Von: "Peter van Haaften" <petervh at gmail.com>
An: "Christof Ressi" <christof.ressi at gmx.at>
Cc: Pd-List <pd-list at lists.iem.at>
Betreff: Re: [PD] pd on pi zero ?

There is a GPIO pi zero soundcard to be released soon by an Australian company called Audio Injector:
 
http://www.audioinjector.net/rpi-shop

I have used their stereo card on my PI2 & 3 with great results. . . very low latency (below 4ms!).
 
Also they have a 16 channel card (8in/8out) which is very tempting.
 
Peter
 
On Fri, Sep 1, 2017 at 2:37 PM, Christof Ressi <christof.ressi at gmx.at[mailto:christof.ressi at gmx.at]> wrote:I can also recommend this very cheap thing here (around 8€):

http://www.manhattan-products.com/hi-speed-usb-3-d-sound-adapter[http://www.manhattan-products.com/hi-speed-usb-3-d-sound-adapter]
https://www.neuhold-elektronik.at/catshop/product_info.php?products_id=4925

(I think both are more or less the same).

the latency is quite bad but basically the same as the Behringer UCA202. I used it several interactive installations with the Raspberry Pi 3 where I didn't need ultra low latencies and it worked well.

Christof





 
 

Gesendet: Freitag, 01. September 2017 um 19:38 Uhr
Von: "Daniel Iglesia" <daniel.iglesia at gmail.com[mailto:daniel.iglesia at gmail.com]>
An: "Theron Trowbridge" <theron.trowbridge at gmail.com[mailto:theron.trowbridge at gmail.com]>
Cc: "pd-list at lists.iem.at[mailto:pd-list at lists.iem.at]" <pd-list at lists.iem.at[mailto:pd-list at lists.iem.at]>, "Thomas Grill" <gr at grrrr.org[mailto:gr at grrrr.org]>
Betreff: Re: [PD] pd on pi zero ?

I got smooth audio stereo output (didn't test input) with a Behringer U-Control UCA202 and a pi-zero.
I just tried a simple sine wave, I didn't push it to see what happens under load...but now I'm curious to revisit it and see...
 
On Fri, Sep 1, 2017 at 10:16 AM, Theron Trowbridge <theron.trowbridge at gmail.com[mailto:theron.trowbridge at gmail.com][mailto:theron.trowbridge at gmail.com[mailto:theron.trowbridge at gmail.com]]> wrote:
I would think Pd should work on a zero, though I haven't tried it myself.
 
Miller has some sound card recommendations on the Pd documentation http://msp.ucsd.edu/Pd_documentation/x3.htm#s1.0[http://msp.ucsd.edu/Pd_documentation/x3.htm#s1.0][http://msp.ucsd.edu/Pd_documentation/x3.htm#s1.0[http://msp.ucsd.edu/Pd_documentation/x3.htm#s1.0]] in the section "Audio hardware in Linux".
 
I have had good luck with the Griffin Technology iMic with the non-zero Raspberry Pi models - amazon.com/gp/product/B003Y5D776[http://amazon.com/gp/product/B003Y5D776][http://amazon.com/gp/product/B003Y5D776[http://amazon.com/gp/product/B003Y5D776]], and I think it's based on one of the chipsets that Miller found worked well.
 
 
-Theron
^
 

 
On Fri, Sep 1, 2017 at 3:51 AM, Thomas Grill <gr at grrrr.org[mailto:gr at grrrr.org][mailto:gr at grrrr.org[mailto:gr at grrrr.org]]> wrote:Hi Jaime,
i have successfully used the PhatDAC and other I2S based dacs. Output-only though!
Will report later on trying the audioinjector octo card which is input/output.
best, Thomas

> Am 31.08.2017 um 04:37 schrieb Jaime Oliver <jaime.oliver2 at gmail.com[mailto:jaime.oliver2 at gmail.com][mailto:jaime.oliver2 at gmail.com[mailto:jaime.oliver2 at gmail.com]]>:
>
> Hello everyone!
>
> Has anyone tried to use pd on a pi zero and if so, which audio interface did you use?
>
> J> _______________________________________________
> Pd-list at lists.iem.at[mailto:Pd-list at lists.iem.at][mailto:Pd-list at lists.iem.at[mailto:Pd-list at lists.iem.at]] mailing list
> UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list[https://lists.puredata.info/listinfo/pd-list][https://lists.puredata.info/listinfo/pd-list[https://lists.puredata.info/listinfo/pd-list]]


_______________________________________________
Pd-list at lists.iem.at[mailto:Pd-list at lists.iem.at][mailto:Pd-list at lists.iem.at[mailto:Pd-list at lists.iem.at]] mailing list
UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list[https://lists.puredata.info/listinfo/pd-list][https://lists.puredata.info/listinfo/pd-list[https://lists.puredata.info/listinfo/pd-list]]
 
_______________________________________________
Pd-list at lists.iem.at[mailto:Pd-list at lists.iem.at][mailto:Pd-list at lists.iem.at[mailto:Pd-list at lists.iem.at]] mailing list
UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list[https://lists.puredata.info/listinfo/pd-list][https://lists.puredata.info/listinfo/pd-list[https://lists.puredata.info/listinfo/pd-list]]
 _______________________________________________ Pd-list at lists.iem.at[mailto:Pd-list at lists.iem.at] mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list[https://lists.puredata.info/listinfo/pd-list][https://lists.puredata.info/listinfo/pd-list[https://lists.puredata.info/listinfo/pd-list]]

_______________________________________________
Pd-list at lists.iem.at[mailto:Pd-list at lists.iem.at] mailing list
UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list[https://lists.puredata.info/listinfo/pd-list]



More information about the Pd-list mailing list