[PD] dimmer from pure data

Antoine Rousseau antoine at metalu.net
Tue Sep 19 00:23:38 CEST 2017


>
> The raspi's GPIO is not enough?
> Is the arduino still needed?


I do think so, because precise interrupt handling is needed.
Also (even with an arduino) don't expect a very fine dimming: 100 different
values, linearly spaced between 0 and 100%, reading the firmware they
provide, sketch #4 ; better firmware is possible though, but quite a hard
work...


Antoine Rousseau
  http://www.metalu.net <http://metalu.net> __
http://www.metaluachahuter.com/
<http://www.metaluachahuter.com/compagnies/al1-ant1/>


2017-09-18 23:14 GMT+02:00 Martin Peach <chakekatzil at gmail.com>:

> On Mon, Sep 18, 2017 at 4:54 PM, Csaba Láng <langcsaba at gmail.com> wrote:
>
>>
>> The raspi's GPIO is not enough?
>> Is the arduino still needed?
>>
>> One or the other should work. If you can run Pd on the pi it would be
> even better.
>
>
>>
>>
>>
>> On Monday, September 18, 2017, Martin Peach <chakekatzil at gmail.com>
>> wrote:
>> > On Mon, Sep 18, 2017 at 4:26 PM, Csaba Láng <langcsaba at gmail.com>
>> wrote:
>> >>
>> >> what do you think about this board?
>> >> https://www.turkisharearugs.com/8-channel-ac-programmable-li
>> ght-dimmer-module-controller-board-arduino-raspberry-compatible-5060hz
>> >>
>> >
>> > Looks good. You could control it with an arduino via Pd's [comport].
>> >
>>
>> _______________________________________________
>> Pd-list at lists.iem.at mailing list
>> UNSUBSCRIBE and account-management -> https://lists.puredata.info/li
>> stinfo/pd-list
>>
>>
>
> _______________________________________________
> Pd-list at lists.iem.at mailing list
> UNSUBSCRIBE and account-management -> https://lists.puredata.info/
> listinfo/pd-list
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.puredata.info/pipermail/pd-list/attachments/20170919/c0b43ad7/attachment.html>


More information about the Pd-list mailing list