[PD] sysex messages

[Christof Ressi]

are you sure you're correctly assembling your sysex messages in Pd? you could use [sysexin] to get the raw sysex messages from your Novation circuit, pass them straight to [midiout] and then have a look at Gmidimonitor.

> Gesendet: Donnerstag, 22. Februar 2018 um 23:31 Uhr
> Von: "mario buoninfante" <mario.buoninfante at gmail.com>
> An: "Christof Ressi" <christof.ressi at gmx.at>, pd-list <pd-list at iem.at>
> Betreff: Re: Aw: Re: [PD] sysex messages
>
> yap, this makes sense. I imagined Gmidimonitor does that. but why is not 
> parsing midi from Pd?
> 
> sorry, maybe I'm just missing the point, but I'm really trying to get my 
> head around with that ;)
> 
> 
> cheers
> 
> 
> On 02/22/2018 10:29 PM, Christof Ressi wrote:
> > don't confuse MIDI messages with the individual bytes which make up the message. Gmidimonitor parses the byte stream so it can tell you which messages it gets. [midiout] is only responsible for sending raw *bytes* to a MIDI device. it's your job to assemble your MIDI *messages*.
> >
> >
> > Gesendet: Donnerstag, 22. Februar 2018 um 23:05 Uhr
> > Von: "mario buoninfante" <mario.buoninfante at gmail.com>
> > An: Alex <x37v.alex at gmail.com>
> > Cc: pd-list at lists.iem.at
> > Betreff: Re: [PD] sysex messages
> >
> > yap, I know that at the end of the day MIDI is dealing with 1 byte at time. I was wondering why there's a difference between 2 different piece of code that generates MIDI (Pd and Hardware synth).
> > for example I just monitored (via USB) my Novation Circuit (a groovebox) and Gmidimonitor receives messages 81 bytes long. with Pd as I said is always 1 byte.
> > now my question would be, how is this possible?
> > I'm sure Circuit sends sysex 81 bytes long, so I know that this is correct, but still I don't know why Pd doesn't allow something like that.
> >   
> > cheers,
> > Mario
> >   
> > On 02/22/2018 09:58 PM, Alex wrote:
> >
> > MIDI is a serial protocol, individual bits running down a single line, we now also have USB midi which is a little bit different than that but usually that is abstracted for you.The software monitor you're using likely groups these for you but in reality you simply have a stream of individual bits on the hardware line..
> > PD's object let you do bytes at a time instead of individual bits :)
> >   
> > On Thu, Feb 22, 2018 at 1:47 PM, mario buoninfante <mario.buoninfante at gmail.com[mailto:mario.buoninfante at gmail.com]> wrote:
> > Hi Alex,
> >   
> > thanks for your reply. I think that also using your abstraction Pd will spit out 1 byte per time (I didn't check it, but I assume that cause it's not an external in C).
> > about MIDI if I'm not wrong, bytes are grouped in accord with the type of message, ie Note on/off and CC are 3 bytes messages, channel pressure and program change are 2 bytes, sysex have variable length and so on. and I presume they're sent out in group.
> > in fact when I monitor MIDI messages coming for certain applications (I'm on Linux and I'm using Gmidimonitor) the console tells me the sysex size in bytes. so, with Pd the size is always 1 byte, but with other programming languages and softwares is variable and goes in accord with the sysex I generated.
> >   
> > cheers,
> > Mario
> >
> >   
> >
> > On 02/22/2018 09:34 PM, Alex wrote:
> >
> > I haven't tested in a while but I wrote an abstraction to take a list, wrap it in the sysex start and end and output it as individual bytes: https://github.com/x37v/pure_data[https://github.com/x37v/pure_data]
> >   midi is a byte oriented protocol..
> >   
> > On Thu, Feb 22, 2018 at 1:24 PM, mario buoninfante <mario.buoninfante at gmail.com[mailto:mario.buoninfante at gmail.com]> wrote:Hi,
> >
> >
> > do you guys know if there's a way to send a list of sysex messages (or 1 complete message, let's say 8 bytes long) rather then 1 byte per time?
> >
> > if not, do you know if there's a particular reason why it's not possible?
> >
> >
> > cheers,
> >
> > Mario
> >
> >
> > _______________________________________________
> > Pd-list at lists.iem.at[mailto:Pd-list at lists.iem.at] mailing list
> > UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list[https://lists.puredata.info/listinfo/pd-list]
> > _______________________________________________ Pd-list at lists.iem.at mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list[https://lists.puredata.info/listinfo/pd-list]
> 
>