[PD] high speed usb3 camera can not be found

[Csaba Láng]

no /dev/video at all. If I connect a usb2 webcam, that works, /dev/video0
appears.
user has access to the camera as the pylon software from the producer can
see it immediately, could change the parameters such as the device name or
resolution. But I need it in pd :)

On Sun, Aug 5, 2018 at 3:26 PM Bastiaan van den Berg <buzz at spacedout.nl>
wrote:

> 1) do you see /dev/video* when you plug it in
> 2) does your user have access to that
>
> just like any other camera?
>
> On Sun, Aug 5, 2018 at 2:59 PM, Csaba Láng <langcsaba at gmail.com> wrote:
>
>> Dear list,
>>
>> I use special 227fps usb cameras.
>> lsusb shows the id and the bus.
>> Bus 006 Device 002: ID 2676:ba02 Basler AG ace
>> How can I find the path to it and use with pix_video?
>> Test software shows device input.
>> device0-7 can not find it as /dev/video* does not exist.
>> Best,
>>
>> Popesz
>>
>> _______________________________________________
>> Pd-list at lists.iem.at mailing list
>> UNSUBSCRIBE and account-management ->
>> https://lists.puredata.info/listinfo/pd-list
>>
>>
> _______________________________________________
> Pd-list at lists.iem.at mailing list
> UNSUBSCRIBE and account-management ->
> https://lists.puredata.info/listinfo/pd-list
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.puredata.info/pipermail/pd-list/attachments/20180805/09e1b57b/attachment-0001.html>