[PD] high speed usb3 camera can not be found

[Csaba Láng]

By the way I found out that this camera uses HALCON, and there is a plugin
to pix_video:
https://github.com/rfabbri/Gem/tree/master/plugins/videoHALCON
Should it work?

On Sun, Aug 5, 2018 at 9:24 PM Csaba Láng <langcsaba at gmail.com> wrote:

> Bast,
>
> how did you check it?
> do you know any other high speed camera around 150fps and above which is
> puredata compatible?
> Thanks for your answer anyway.
>
> On Sun, Aug 5, 2018 at 6:26 PM Bastiaan van den Berg <buzz at spacedout.nl>
> wrote:
>
>> From what i see from that camera, it doesnt use video4linux , and thus,
>> is -not- supported to use in PureData
>>
>> On Sun, Aug 5, 2018 at 5:04 PM, Csaba Láng <langcsaba at gmail.com> wrote:
>>
>>> I guess the producer calls its software pylon.
>>> Anyway maybe I have to do something with the udev rulers, loos like it
>>> can not write into it.
>>>
>>> On Sun, Aug 5, 2018 at 4:32 PM Bastiaan van den Berg <buzz at spacedout.nl>
>>> wrote:
>>>
>>>> Whats 'the pylon software' ? How does it control the camera without a
>>>> /dev/video?
>>>>
>>>> pix_video requires normal video interfaces
>>>>
>>>> On Sun, Aug 5, 2018 at 3:35 PM, Csaba Láng <langcsaba at gmail.com> wrote:
>>>>
>>>>> no /dev/video at all. If I connect a usb2 webcam, that works,
>>>>> /dev/video0 appears.
>>>>> user has access to the camera as the pylon software from the producer
>>>>> can see it immediately, could change the parameters such as the device name
>>>>> or resolution. But I need it in pd :)
>>>>>
>>>>> On Sun, Aug 5, 2018 at 3:26 PM Bastiaan van den Berg <
>>>>> buzz at spacedout.nl> wrote:
>>>>>
>>>>>> 1) do you see /dev/video* when you plug it in
>>>>>> 2) does your user have access to that
>>>>>>
>>>>>> just like any other camera?
>>>>>>
>>>>>> On Sun, Aug 5, 2018 at 2:59 PM, Csaba Láng <langcsaba at gmail.com>
>>>>>> wrote:
>>>>>>
>>>>>>> Dear list,
>>>>>>>
>>>>>>> I use special 227fps usb cameras.
>>>>>>> lsusb shows the id and the bus.
>>>>>>> Bus 006 Device 002: ID 2676:ba02 Basler AG ace
>>>>>>> How can I find the path to it and use with pix_video?
>>>>>>> Test software shows device input.
>>>>>>> device0-7 can not find it as /dev/video* does not exist.
>>>>>>> Best,
>>>>>>>
>>>>>>> Popesz
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> Pd-list at lists.iem.at mailing list
>>>>>>> UNSUBSCRIBE and account-management ->
>>>>>>> https://lists.puredata.info/listinfo/pd-list
>>>>>>>
>>>>>>>
>>>>>> _______________________________________________
>>>>>> Pd-list at lists.iem.at mailing list
>>>>>> UNSUBSCRIBE and account-management ->
>>>>>> https://lists.puredata.info/listinfo/pd-list
>>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> Pd-list at lists.iem.at mailing list
>>>>> UNSUBSCRIBE and account-management ->
>>>>> https://lists.puredata.info/listinfo/pd-list
>>>>>
>>>>>
>>>> _______________________________________________
>>>> Pd-list at lists.iem.at mailing list
>>>> UNSUBSCRIBE and account-management ->
>>>> https://lists.puredata.info/listinfo/pd-list
>>>>
>>>
>>> _______________________________________________
>>> Pd-list at lists.iem.at mailing list
>>> UNSUBSCRIBE and account-management ->
>>> https://lists.puredata.info/listinfo/pd-list
>>>
>>>
>> _______________________________________________
>> Pd-list at lists.iem.at mailing list
>> UNSUBSCRIBE and account-management ->
>> https://lists.puredata.info/listinfo/pd-list
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.puredata.info/pipermail/pd-list/attachments/20180805/a2560a99/attachment.html>