[PD] non-socket (88)
michael strohmann
itsnotfair9 at gmail.com
Mon Feb 18 00:56:36 CET 2019
HI,
thanks for looking into this!
i actually use pd 0.47 on RPi B+ / jessie
in any case i found a way to use the suggested workaround with [iemnet/udpsend]
i send [disconnect, connect IP PORT( only as when a message is received with [netrecieve -u -b]
and i prevent any messages beeing sent thru [udpsend] if the socket is closed (a zero on the outlet of udpsend)
so for the last couple of hours i did not have any errors like “iemnet: socket-shutdown: transport endpoint is not connected”
even if i switch off the wlan router - which caused the error before.
now i really hope that this solves the pd-freeze issue, since it might be that the closed socket and the pd-freeze coincided per accident…or that there is some other OS weirdness going on .
> On 17 Feb 2019, at 23:26, Lucas Cordiviola <lucarda27 at hotmail.com> wrote:
>
> Hi,
>
> I've been testing [netsend -u] for a couple of hours on Pd 0.49-0 on windows. I had no trouble if there is no receivers. I used a windows tablet and a linux box for listening. I have switch them off for a while and then re-enter to the LAN. Didn't get any "Socket operation on non-socket (88)".
>
> A couple of things you could check:
>
> + Are you using Pd 0.49-0 on your raspberry?
>
> + Could it be that there is something on the OS that is closing "Socket connections" (or network adapter) to save battery power or something like that?
>
>
> Mensaje telepatico asistido por maquinas.
> On 2/17/2019 5:23 AM, michael strohmann wrote:
>> i am sending OSC messages with [netsend -u -b]
>>
>> there is obviously an issue with [netsend] closing the socket if nobody is listening.
>> which it should not do in UDP mode.
>> https://github.com/pure-data/pure-data/issues/373 <https://github.com/pure-data/pure-data/issues/373>
>>
>> but this:
>>
>> netsend: Socket operation on non-socket (88)
>>
>> is lethal to my patch. immediate freeze
>> unfortunatly it occurs quite often.
>>
>> i also know next to nothing about Sockets
>> is it a pd problem or does it stem from the os (unix jessie in my case, on raspberry) ???
>>
>> also due to Christof Ressi:
>> I can confirm that both [iemnet/udpsend] [mrpeach/udpsend] (from Pd extended) close the socket on Linux but only [mrpeach/udpsend] gives a warning and sends a 0. I'll do a bug report.
>>
>> in the meantime, are there any options to send osc via udp regardless of the existance of a receiver?
>>
>> cheers!
>> michael
>>
>>
>>> On 16 Feb 2019, at 20:06, Lucas Cordiviola <lucarda27 at hotmail.com <mailto:lucarda27 at hotmail.com>> wrote:
>>>
>>> Did you tried sending every second an empty message [send ( instead of
>>> "reopening a connection" ?
>>>
>>>
>>> Mensaje telepatico asistido por maquinas.
>>>
>>> On 2/16/2019 3:57 PM, michael strohmann wrote:
>>>> i finally could caught pd in the act of freezing:
>>>>
>>>> the console said:
>>>>
>>>> recv: Connection refused (111)
>>>> netsend: Socket operation on non-socket (88)
>>>> warning: 33 removed from poll list but not found
>>>>
>>>>
>>>> i connect every second to mobile phones that run Lemur to send and receive OSC
>>>> usually if a phone leaves the network, nothing bad happens, the console says:
>>>>
>>>>
>>>> recv: Connection refused (111)
>>>> netsend: Bad file descriptor (9)
>>>> warning: 32 removed from poll list but not found
>>>>
>>>>
>>>> So it seems to me that this non-socket(88) problem manages to freeze pd
>>>> (or is it this number: 88, which has a bad connotation in austria ?)
>>>>
>>>>
>>>> Thanks!
>>>> michael
>>>>
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> Pd-list at lists.iem.at <mailto:Pd-list at lists.iem.at> mailing list
>>>> UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list <https://lists.puredata.info/listinfo/pd-list>
>>> _______________________________________________
>>> Pd-list at lists.iem.at <mailto:Pd-list at lists.iem.at> mailing list
>>> UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list <https://lists.puredata.info/listinfo/pd-list>
>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.puredata.info/pipermail/pd-list/attachments/20190218/7cc55ee8/attachment.html>
More information about the Pd-list
mailing list