[PD] Pduino 0.7 compatibility with Pd vanilla

[Gilles Marivier]

Le 04/01/2021 à 23:24, Roman Haefeli a écrit :
> On Wed, 2020-12-23 at 14:52 +0100, Gilles Marivier wrote:  >> Le 23/12/2020 à 12:24, IOhannes m zmoelnig a écrit : >>> On 
12/23/20 11:33 AM, Gilles Marivier wrote: >>>> hello, thank you. >>>> 
 >>>> Le 23/12/2020 à 10:51, IOhannes m zmoelnig a écrit : >>>>> On 
12/22/20 4:59 PM, Gilles Marivier wrote: >>>>>> hello, I encounter a 
problem regarding Pduino 0.6 with Pd >>>>>> vanilla 0.51-1. The digital 
input 7 of Arduino Nano doesn't >>>>>> return anything. > > I had a 
chance to test [arduino] from pduino 0.6 and it seems to > still work 
with current FIRMATA version 2.5 from most recent Arduino > IDE 1.8.13. 
However, I tested with an Arduino Leonardo board, since I > don't own a 
Nano. > > Regarding your problem: Is only input 7 not working? Are the 
other > pins fine? > > If you find issues, please test them against 
pduino version 0.6 or > 0.7 and report back. I just released the latter 
and it will appear on > Deken tomorrow. It contains only cosmetic 
changes and is functionally > the same as 0.6. > > Roman

Hi, I'm back on the project using Pduino. I tested the new release 
(thanks Roman). There's still the digital input #7 problem with the Nano 
(168 or 368).

Problem description : although sending message "pinMode 7 input" to the 
[arduino] object, reading the #7 input state is impossible. There is no 
error message, just nothing happens.

Config :
- OSX HighSierra 10.13.6
- Pduino 0.7
- Pd 0.51.1
- Arduino Nano Atmel 168
- firmware AllInputsFirmata.ino 2 5
Tested too with :
- Arduino Nano Atmel 368
- firmware StandardFirmata.ino 2 5

Works fine with Max/MSP's [arduino] object.


>  > _______________________________________________ Pd-list at lists.iem.at 
 > mailing list UNSUBSCRIBE and account-management -> > 
https://lists.puredata.info/listinfo/pd-list
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.puredata.info/pipermail/pd-list/attachments/20210318/69ff1376/attachment-0001.htm>