[PD] Attaching Xcode debugger
Dan Wilcox
danomatika at gmail.com
Tue Feb 28 12:51:15 CET 2023
Ah again... if you are debugging an external, it should also be compiled with optimization disabled and debugging symbols enabled, typically CFLAGS="-O0 -g"
> On Feb 28, 2023, at 12:43 PM, Dan Wilcox <danomatika at gmail.com> wrote:
>
> Ah, I forgot an important point: first configure with debugging symbols.
>
> ./configure --enable-debug
>
> If building from a git clone, first generate configure using autoconf via:
>
> ./autogen.sh
>
> Actually, this info is in the INSTALL.txt file, but I'm writing it here anyway. ;)
>
>> On Feb 28, 2023, at 12:39 PM, Dan Wilcox <danomatika at gmail.com <mailto:danomatika at gmail.com>> wrote:
>>
>>
>>> On Feb 28, 2023, at 12:00 PM, pd-list-request at lists.iem.at <mailto:pd-list-request at lists.iem.at> wrote:
>>>
>>> Hello
>>>
>>> So we all know how Apple is sandboxing like hell.
>>
>> Sure, but allowing *any* old program to be debugged / decompiled in realtime is not the best for security implications, at least Apple thinks so.
>>
>> Your subject is a little misleading as the "Xcode debugger" is essential lldb. Xcode itself simply wraps lldb when debugging and provides a UI top interact with it. In fact, on a debug build crash in Xcode, you can enter lldb commands directly into the console, ie. "bt" will provide a backtrace directly.
>>
>>> How do people attach a debugger to pd to do development?
>>
>> "lldb" like "gdb"
>>
>> For quick tests of a known crasher, I usually use:
>>
>> make
>> cd bin
>> lldb pd
>>
>> This will use the system Tcl/Tk which has had issues for years now, but is enough for quick testing.
>>
>> For best testing, build the .app and invoke the pd binary inside it. For example:
>>
>> make
>> make app
>> lldb Pd-0.53-2.app/Contents/Resources/bin/pd
>>
>> Once lldb launches, you have to start the process:
>>
>> process launch
>>
>> When a crash happens, you can get the backtrace with "bt", change frames with "f #", and print variables via "v". If you have used gdb before, this is a helpful crib sheet:
>>
>> https://lldb.llvm.org/use/map.html <https://lldb.llvm.org/use/map.html>
>>
>> Note: If you are using a newer macOS system and want to *also* use a newer version of Tcl/Tk, build Wish.app first then use it to make the Pd .app bundle:
>>
>> ./macos/tcltk-wish.sh 8.6.12
>>
>> produces a Wish-8.6.12.app. Next use it to build Pd .app with:
>>
>> ./mac/osx-app.sh -w Wish-8.6.12.app 0.53-2
>>
>> Now you can change the C sources and rebuild with:
>>
>> make
>> ./mac/osx-app.sh -w Wish-8.6.12.app 0.53-2
>>
>>> Do I have to recompile pd myself as the long winded detour?
>>
>> If you want debugging symbols, yes. Fortunately it is relative easy to compile Pd so I don't consider it "long-winded." In fact, we have spent quite a bit of time to make this both possible *and* relatively easy. (See above.)
>>
>> --------
>> Dan Wilcox
>> @danomatika <http://twitter.com/danomatika>
>> danomatika.com <http://danomatika.com/>
>> robotcowboy.com <http://robotcowboy.com/>
>>
>>
>>
>
> --------
> Dan Wilcox
> @danomatika <http://twitter.com/danomatika>
> danomatika.com <http://danomatika.com/>
> robotcowboy.com <http://robotcowboy.com/>
>
>
>
--------
Dan Wilcox
@danomatika <http://twitter.com/danomatika>
danomatika.com <http://danomatika.com/>
robotcowboy.com <http://robotcowboy.com/>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.puredata.info/pipermail/pd-list/attachments/20230228/ae4e2149/attachment.htm>
More information about the Pd-list
mailing list