[PD] [PD-announce] Pduino 0.3 release
we are
gateswideopen at gmail.com
Tue Mar 20 04:39:38 CET 2007
cool!
all working now.
thanks marius and hans
On 3/20/07, marius schebella <marius.schebella at gmail.com> wrote:
> your circuit setup should work. you can also try to put the LED into
> pin12 and gnd (short leg to ground). usually you should not do that
> without an additional resistor, but for testing it is ok and will will
> make it light brighter.
> I don't know on which serial port your arduino is, but if you receive
> the version number it seems to be ok.
> when testing make sure that you set the pins to output mode
> pinMode 13 1 and then switch the pin to high with
> digital 13 1.
> sometimes when you have sent the pin analog output messages you will
> have to reset pinMode to 1 again.
> marius.
>
> we are wrote:
> >> Hi,
> >> this is very strange. which version of arduino language are you using?
> >> I can't think of another problem than that... which OS?
> >
> > i'm using all the latest stuff, i'm pretty sure of that.
> > i'm on gentoo linux and i have tried a round about method and bypassed
> > the java program and compiled and uploaded myself using avrdude.
> > this has worked. frankly i think i prefer compiling it myself rather
> > than the java app, it seems a bit less clunky. however, it would be
> > good to understand why it is not compiling with the java app.
> > i think that it may not be seeing where pins_arduino.c is but i really
> > don't know what i'm talking about.
> >
> > the only thing now is getting the arduino to commuicate witht the patch.
> > i have started testing but kinda fumbling round in the dark trying to
> > work some stuff out.
> > i have the patch loaded and all signs are good, it is registering
> > /dev/ttyUSB0 and reporting to me the firmware as 1.0 so i'm happy with
> > that.
> > i started with jamming a led into the GND and Digital 13 pins and
> > switching one of the digital toggles on the patch. however nothing
> > yet. i thought that might light up my life but, no.
> > i also tried putting a potentiometer with the outer pins in 5v and GND
> > and the middle pin into analog 2 but nope to that either.
> > i wonder if its my electronic or skills or my fumbling skills that are
> > at a loss here.
> > any suggestions welcome.
> > cheers
> > On 3/20/07, marius schebella <marius.schebella at gmail.com> wrote:
> >> Hi,
> >> this is very strange. which version of arduino language are you using?
> >> I can't think of another problem than that... which OS?
> >> marius.
> >>
> >> we are wrote:
> >> > so now i have my new arduino i'm getting stuck into it.
> >> > i have made all sorts of christmas lights and the necessary tutorials
> >> > and i'm now starting the pd exploration.
> >> > i have everything running except when i try and compile the
> >> > Pd_firmware.pde for pduino within the java arduino program i get an
> >> > error that does not allow me to compile the software.
> >> >
> >> >
> >> > In function `void checkDigitalInputs()':
> >> > error: `port_to_input' was not declared in this scope
> >> >
> >> > and it highlights lines... 259- 272
> >> >
> >> > void checkDigitalInputs(void) {
> >> > if(digitalInputsEnabled) {
> >> > previousDigitalInputs = digitalInputs;
> >> > digitalInputs = _SFR_IO8(port_to_input[PB]) << 8; // get pins
> >> 8-13
> >> > digitalInputs += _SFR_IO8(port_to_input[PD]); // get pins
> >> 0-7
> >> > digitalInputs = digitalInputs &~ digitalPinStatus; // ignore
> >> pins set OUTPUT
> >> > if(digitalInputs != previousDigitalInputs) {
> >> > // TODO: implement more ports as channels for more than 16
> >> digital pins
> >> > Serial.print(DIGITAL_MESSAGE,BYTE);
> >> > Serial.print(digitalInputs % 128, BYTE); // Tx pins 0-6
> >> > Serial.print(digitalInputs >> 7, BYTE); // Tx pins 7-13
> >> > }
> >> > }
> >> > }
> >> >
> >> >
> >> > i don't know any c but from what i can estimate, there is no
> >> >
> >> > int port_to_input
> >> >
> >> > is this file refering to another file, or where have i gone wrong?
> >> >
> >> > thanks
> >> >
> >> > On 3/10/07, we are <gateswideopen at gmail.com> wrote:
> >> >> ---------- Forwarded message ----------
> >> >> From: we are <gateswideopen at gmail.com>
> >> >> Date: Mar 10, 2007 1:43 PM
> >> >> Subject: Re: [PD] [PD-announce] Pduino 0.3 release
> >> >> To: Hans-Christoph Steiner <hans at eds.org>
> >> >>
> >> >>
> >> >> thanks hans
> >> >>
> >> >> can't wait to try it, but i have to as my duino is in transit damnit!
> >> >> great to see people using this thing as i'm about to join the club.
> >> >> ta
> >> >>
> >> >>
> >> >> On 3/9/07, Hans-Christoph Steiner <hans at eds.org> wrote:
> >> >>> Sure, thanks for testing it. I'd like to add pulseOut() and shiftOut
> >> >>> (), do you have any devices that need that, like servos or character
> >> >>> displays? I don't so...
> >> >>>
> >> >>> .hc
> >> >>>
> >> >>> On Mar 8, 2007, at 5:18 AM, Roman Haefeli wrote:
> >> >>>
> >> >>>> hello hans
> >> >>>>
> >> >>>> cool! i will test it as soon as i will get my arduino in my fingers
> >> >>>> again.
> >> >>>>
> >> >>>> and:
> >> >>>>
> >> >>>> many thanks or all that work you invested in this project!
> >> >>>>
> >> >>>> cheers
> >> >>>> roman
> >> >>>>
> >> >>>> On Thu, 2007-03-08 at 01:04 -0500, Hans-Christoph Steiner wrote:
> >> >>>>> http://at.or.at/hans/pd/objects.html
> >> >>>>>
> >> >>>>> You can read all about the protocol design here:
> >> >>>>>
> >> >>>>> http://www.arduino.cc/playground/Interfacing/Sensorbox
> >> >>>>>
> >> >>>>> Here are some key changes:
> >> >>>>> - new MIDI-based protocol
> >> >>>>> - rebuilt from scratch, cleaner and smaller code
> >> >>>>> - timer-based loop to poll analogIns and serial
> >> >>>>> - the firmware will report its version, and blink the version at
> >> boot
> >> >>>>> - reduced serial speed to 57600 to work around glitches
> >> >>>>> - Makefile to build from command line
> >> >>>>>
> >> >>>>> Hopefully this works better, test it out and let me know.
> >> >>>>>
> >> >>>>> .hc
> >> >>>>>
> >> >>>>>
> >> ---------------------------------------------------------------------
> >> >>>>> ---
> >> >>>>>
> >> >>>>> Looking at things from a more basic level, you can come up with a
> >> >>>>> more direct solution... It may sound small in theory, but it in
> >> >>>>> practice, it can change entire economies. - Amy Smith
> >> >>>>>
> >> >>>>>
> >> >>>>>
> >> >>>>> _______________________________________________
> >> >>>>> PD-announce mailing list
> >> >>>>> PD-announce at iem.at
> >> >>>>> http://lists.puredata.info/listinfo/pd-announce
> >> >>>>>
> >> >>>>> _______________________________________________
> >> >>>>> PD-list at iem.at mailing list
> >> >>>>> UNSUBSCRIBE and account-management -> http://lists.puredata.info/
> >> >>>>> listinfo/pd-list
> >> >>>>
> >> >>>>
> >> >>>> ___________________________________________________________
> >> >>>> Telefonate ohne weitere Kosten vom PC zum PC: http://
> >> >>>> messenger.yahoo.de
> >> >>>>
> >> >>>>
> >> >>>> _______________________________________________
> >> >>>> PD-list at iem.at mailing list
> >> >>>> UNSUBSCRIBE and account-management -> http://lists.puredata.info/
> >> >>>> listinfo/pd-list
> >> >>>
> >> >>>
> >> >>>
> >> ------------------------------------------------------------------------
> >> >>> ----
> >> >>>
> >> >>> Looking at things from a more basic level, you can come up with a
> >> >>> more direct solution... It may sound small in theory, but it in
> >> >>> practice, it can change entire economies. - Amy Smith
> >> >>>
> >> >>>
> >> >>>
> >> >>> _______________________________________________
> >> >>> PD-list at iem.at mailing list
> >> >>> UNSUBSCRIBE and account-management ->
> >> http://lists.puredata.info/listinfo/pd-list
> >> >>>
> >> >
> >> > _______________________________________________
> >> > PD-list at iem.at mailing list
> >> > UNSUBSCRIBE and account-management ->
> >> http://lists.puredata.info/listinfo/pd-list
> >> >
> >>
> >>
> >
>
>
More information about the Pd-list
mailing list