[PD] OSCSerial for windows

[Ricardo Dueñas Parada]

> Hi Ricardo,
> Well I didn't have chance to try it with [comport], but I suspect you need
> to make the output of [comport] into lists using the slip packet delimiter
> 192 and [list append] and [list prepend] as in the [list] examples.
> It should not crash Pd though, that's bad...
> Martin

Hi Martin, I used [list preped] and [list append] as you said and now
it works, thanks.

However, I am still getting crashes with the stream from comport (if I
program the microcontroller to send messages every ~200ms, it works
fine), I read a recent mail about unpackOSC, then I tested using just
slipdec (still crashes)

Crashes occur if I send messages too fast, just putting a [metro 50]
to a valid message in slipenc-help.pd or sending microcontroller
messages every 10 - 50 ms, freezes pd, and eventually make it crash.

I don't know what should be the minimun time that slipdec needs to
process a packet, I use the same settings that I use in Linux with
serialIO, OpenSoundControl and OSCruote [1], in Linux it works pretty
well even with shortes times.

Do you know if this difference could be related to the operative system?

Ricardo.


[1] https://ccrma.stanford.edu/wiki/AVR#Communicating_with_Pd_via_OSC_over_USB