[PD] arduino and digital outputs
Jose Luis Santorcuato
santorcuato76 at gmail.com
Sat May 22 00:23:23 CEST 2010
Thanks a lot, ill try... and comment...
Best regards
José
2010/5/21 olsen <sesselastronaut at googlemail.com>
> oye josé
> check this post:
> http://www.mail-archive.com/pd-list@iem.at/msg33130.html
> ...
> though with the Mega there's some lack in the well-behaviour that i would
> like
> to report:
>
> __DigitalInput
> No DigitalInput on Pins 0 to 8 and 12&13
>
> Putting a physical digital input on pin 9 to 11 in pduino the state for all
> these pins is always displayed on digital input 12!
>
> __DigitalOutput
> DigitalOutput only on Pin 10-13 and to get pin 13 high i've to checkerbox
> pin
> 15 in pduino
>
> Seems there's some kind of trouble with the Pin settings and their
> represenation in pduino.
> ...
>
> this was on ubuntu 9.04 with standard firmata
> hth a byte
> salutis
> ø
>
>
>
> On 05/19/2010 08:50 PM, Jose Luis Santorcuato wrote:
>
>> Yes, not work, but in the old boards yes... I tested in my duemilanove
>> and diecimila, and all the digitals outputs works fine, one by one.
>> Mmm, strange ...
>>
>> I tested the Firmata for mega... dont work and crashes...maybe in OSX
>>
>> I use GNU/Linux Ubuntu 9.04... Barbie network...heheheheh
>>
>> Best regards from Chile
>>
>> José
>>
>>
>>
>> 2010/5/19 Jose Luis Santorcuato <santorcuato76 at gmail.com
>> <mailto:santorcuato76 at gmail.com>>
>>
>>
>> Well.... check the arduino firmata program (arduino ide).... the
>> outputs.... 13? 16? when i work with bluetooth i needed change the
>> baud... to 115.200, many programs in arduino ide have a problems...I
>> test the firmata teensy...
>>
>> Best regards
>>
>> José
>>
>>
>> 2010/5/19 Ricardo Lameiro <ricardolameiro at gmail.com
>> <mailto:ricardolameiro at gmail.com>>
>>
>>
>> I also forgot to mention that this issue was mentioned on this
>> list before.
>>
>> there is a link for a firmata firmware made for the mega from
>> the made by the teensy guy.
>>
>> http://www.pjrc.com/tmp/firmata/
>>
>> check the list in here
>> http://www.mail-archive.com/pd-list@iem.at/msg31148.html
>>
>>
>> 2010/5/19 Ricardo Lameiro <ricardolameiro at gmail.com
>> <mailto:ricardolameiro at gmail.com>>
>>
>>
>> As far as I know, the pduino is not made for the arduino
>> mega. so it could work, but you need to test it out. also
>> the firmata firmware would need also some tweak since the
>> mega has more outputs/inputs and analog ports
>>
>> 2010/5/19 Andres Ferrari <anfex at yahoo.com
>> <mailto:anfex at yahoo.com>>
>>
>>
>> hello,
>> When I use the abstraction [arduino] or [comport] object
>> the numbers of the digital outputs (pins) of the arduino
>> hardware
>> don't match with the output's numbers of the patch.
>>
>> for example, when i send 1 to digital output "12" from
>> puredata the led connected to digital out 12 don't turn
>> on but ...but turn on in digital out "14"...
>>
>> only works pins from 10- 13 but 0- 9 dont't work.
>>
>> When I've tested from the arduino's software with a
>> sketch there aren't any problem, all works fine.
>>
>> Is it a [comport]r or "Firmata" problem?
>> I have osx 10.5 and arduino mega.
>>
>> Any suggestions?.....thanks a lot!!!
>>
>>
>> Andrés Ferrari G.
>>
>> http://www.myspace.com/anfex
>>
>>
>>
>> _______________________________________________
>> Pd-list at iem.at <mailto:Pd-list at iem.at> mailing list
>>
>> UNSUBSCRIBE and account-management ->
>> http://lists.puredata.info/listinfo/pd-list
>>
>>
>>
>>
>> --
>> Fagote / Contrafagote
>> Bassoon / Contra-bassoon
>> http://myspace.com/ricardolameiro
>>
>>
>>
>>
>> --
>> Fagote / Contrafagote
>> Bassoon / Contra-bassoon
>> http://myspace.com/ricardolameiro
>>
>> _______________________________________________
>> Pd-list at iem.at <mailto:Pd-list at iem.at> mailing list
>>
>> UNSUBSCRIBE and account-management ->
>> http://lists.puredata.info/listinfo/pd-list
>>
>>
>>
>>
>> --
>>
>> http://arselectronicachile.blogspot.com
>> http://www.myspace.com/santorcuato
>>
>>
>>
>>
>>
>> --
>>
>> http://arselectronicachile.blogspot.com
>> http://www.myspace.com/santorcuato
>>
>>
>>
>>
>> _______________________________________________
>> Pd-list at iem.at mailing list
>> UNSUBSCRIBE and account-management ->
>> http://lists.puredata.info/listinfo/pd-list
>>
>
> --
> ETs DNA will not be televised
> http://hasa-labs.org
>
>
--
http://arselectronicachile.blogspot.com
http://www.myspace.com/santorcuato
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.puredata.info/pipermail/pd-list/attachments/20100521/b8b73d29/attachment.htm>
More information about the Pd-list
mailing list