[PD] Piezo, trigger, Arduino

richard duckworth richduckworth at yahoo.com
Sun Jun 26 01:41:15 CEST 2011


Hi Andy, sorry for the late reply. Just reading your book - totally cool! No I've never tried that type of piezo, sounds intriguing. I'll give it a go next time I'm 'piezo mode'. I use the cheapo bellbuzzer types for non-critical apps and the MEAS film when I want an audiophile sound. As far as the FET buffers go, I bought a load of generic 1 transistor PCB boards and use those to fabricate unity gain buffers with 10 Mega-ohm IP impedance as the need arises. It must be said that the few BSS AR 116 DI boxes that we have make fabulous piezo IP's too, due to the hi impedance in and the wide bandwidth. The MEAS make fabulous contact mics for gongs, cymbals and, my favorite, sawmill blades.    
Rich Duckworth

Lecturer in Music Technology

Department of Music

House 5 

Trinity College 

Dublin 2

Ireland



Tel 353 1 896 1500



It's the most devastating moment in a young mans life, when he quite reasonably says to himself, "I shall never play The Dane!"

--- On Thu, 23/6/11, pd-list-request at iem.at <pd-list-request at iem.at> wrote:

From: pd-list-request at iem.at <pd-list-request at iem.at>
Subject: Pd-list Digest, Vol 75, Issue 91
To: pd-list at iem.at
Date: Thursday, 23 June, 2011, 12:01

Send Pd-list mailing list submissions to
    pd-list at iem.at

To subscribe or unsubscribe via the World Wide Web, visit
    http://lists.puredata.info/listinfo/pd-list
or, via email, send a message with subject or body 'help' to
    pd-list-request at iem.at

You can reach the person managing the list at
    pd-list-owner at iem.at

When replying, please edit your Subject line so it is more specific
than "Re: Contents of Pd-list digest..."


Today's Topics:

   1. Re: Pd performance at TED (Olivier Baudu)
   2. Re: Piezo, trigger, Arduino (padawan12 at obiwannabe.co.uk)


----------------------------------------------------------------------

Message: 1
Date: Thu, 23 Jun 2011 12:56:10 +0200
From: Olivier Baudu <lamouraupeuple at gmail.com>
Subject: Re: [PD] Pd performance at TED
To: Pierre Massat <pimassat at gmail.com>
Cc: pd-list at iem.at
Message-ID: <BANLkTi==w-uRwN_uxKwF_0n83GN=F0hELw at mail.gmail.com>
Content-Type: text/plain; charset="iso-8859-1"

>The fact that he created it on a sequencer in 97 and not on a drumkit in
1963 doesn't make any difference to me.

Ok, but could "beatjazz" be played in an other way than Onyx did ?
If "beatjazz" can't be triggered pre-record patterns, it's pity (for me)
that the audience think it is...

By the way, if Flim had been created in 63 it would make a big difference
for me...
The context of a creation matters, don't you think ?

Cheers...

01ivier

-- 
Envie de tisser ?
http://yamatierea.org/papatchs/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.puredata.info/pipermail/pd-list/attachments/20110623/73f32ec3/attachment-0001.htm>

------------------------------

Message: 2
Date: Thu, 23 Jun 2011 12:00:52 +0100 (BST)
From: "padawan12 at obiwannabe.co.uk" <padawan12 at obiwannabe.co.uk>
Subject: Re: [PD] Piezo, trigger, Arduino
To: richard duckworth <richduckworth at yahoo.com>, pd-list at iem.at
Message-ID:
    <131539004.238019.1308826852682.JavaMail.open-xchange at oxltgw16.schlund.de>
    
Content-Type: text/plain; charset="utf-8"

Ever tried the kind of high voltage piezo you get in ?
cigarette lighters?? MaybeY you can drop that across some high ?
value resistors to get an input suitable for an opamp stage. ?
You would need to remove the spring loaded housing. ?
They would be highly robust and able to
take a beating from a drummer more directly.?
?
a. ?

On 23 June 2011 at 10:43 richard duckworth <richduckworth at yahoo.com> wrote:

> Piezo elements (the round, gold-coloured bell-buzzer type) make excellent
> triggers. Drumpads like the Roland SPD-n type use these as the triggers.
> Modifications need to be done to create a reliable trigger. The mechanical
> integrity of these devices can be a problem: the leads can literally 'fall
> off'. I 'pot' mine in a layer of epoxy so that the leads are literally glued
> to the surface.
> The element can be glued to a rubber pad (this is essentially what Roland
> does) and mounted on a wooden block to create a trigger pad. Roland uses a
> small coil in series with the piezo: this is there to provide transient
> suppression as the instantaneous signal peaks can be quite high (albeit
> fleeting). This coil is a good idea as it protects the circuitry on the first
> buffer the piezo sees. ?
>
> Other Piezo tips (mainly for audio):
> 1) If soldering new leads use a very low wattage iron, low temperature solder
> and complete the solder joint *quickly*
> 2) buy in bulk as a few will get destroyed as you perfect your method
> 3) if using for audio (i.e., as an audio pickup), then the piezo must be
> screened. A 'balanced signal' architecture works well here: piezo elements are
> wired 'signal hot' and 'signal cold', and the hum/RFI suppression is handled
> by a separate screen.
> 4) The MEAS film-type of piezo work much better for audio than the bell-buzzer
> type:
> http://www.meas-spec.com/product/t_product.aspx?id=2478
> 5) Impedance, impedance, impedance! Impedance is the rock upon which many
> piezo hackers perish. These elements need to be presented with an input
> impedance of many megaOhms. The average line input / mic input is totally
> inappropriate for these units. I use a simple FET buffer with an input
> impedance of 10 megaOhms on my piezos. Certain electronic DI boxes will also
> work well due to their high impedance characteristics, e.g., BSS. If piezos
> see a low-to-medium impedance, drastic LF rolloffs occur. This is why the
> cheap guitar contact mics sound so tinny when plugged directly into an amp.
>
> ? ?
>
>
> Rich Duckworth
>
> Lecturer in Music Technology
>
> Department of Music
>
> House 5
>
> Trinity College
>
> Dublin 2
>
> Ireland
>
>
>
> Tel 353 1 896 1500
>
>
>
> It's the most devastating moment in a young mans life, when he quite
> reasonably says to himself, "I shall never play The Dane!"
>
> --- On Thu, 23/6/11, pd-list-request at iem.at <pd-list-request at iem.at> wrote:
>
> From: pd-list-request at iem.at <pd-list-request at iem.at>
> Subject: Pd-list Digest, Vol 75, Issue 88
> To: pd-list at iem.at
> Date: Thursday, 23 June, 2011, 6:42
>
> Send Pd-list mailing list submissions to
> ??? pd-list at iem.at
>
> To subscribe or unsubscribe via the World Wide Web, visit
> ??? http://lists.puredata.info/listinfo/pd-list
> or, via email, send a message with subject or body 'help' to
> ??? pd-list-request at iem.at
>
> You can reach the person managing the list at
> ??? pd-list-owner at iem.at
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Pd-list digest..."
>
>
> Today's Topics:
>
> ???1. Re: control lot of audios files with arduino + puredata
> ? ? ? (FernandoG)
> ???2. Re: Pd performance at TED (Tyler Leavitt)
> ???3. Re: Pd performance at TED (Jonathan Wilkes)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Wed, 22 Jun 2011 21:13:45 -0400
> From: FernandoG <dataferx at gmail.com>
> Subject: Re: [PD] control lot of audios files with arduino + puredata
> To: Hans-Christoph Steiner <hans at at.or.at>
> Cc: pd-list at iem.at, Martin Peach <martin.peach at sympatico.ca>
> Message-ID: <BANLkTink3DOLAxTHFsyaFuXvMVxFu+enbA at mail.gmail.com>
> Content-Type: text/plain; charset="iso-8859-1"
>
> Hi guys
>
> I was researching about arduino mega and pd firmata and i found a post where
> they say that its not posible to use all digital output and analog inputs of
> arduino mega. http://arduino.cc/forum/index.php?topic=62256.0
>
> I gona buy arduino mega this week, but i need all inputs-output working for
> my proyect. Do you know something about this incompatibility??
>
> thanks
>
> 2011/6/3 FernandoG <dataferx at gmail.com>
>
> > Thanks guys, first i will try the easy way, arduino mega.
> >
> > best!
> >
> >
> > 2011/6/3 Hans-Christoph Steiner <hans at at.or.at>
> >
> >>
> >> I think people have done some shift register+firmata things, but nothing
> >> got integrated into StandardFirmata/? Here's an example:
> >>
> >> http://www.makingthingsmove.org/blog/
> >>
> >> .hc
> >>
> >>
> >> On Jun 2, 2011, at 1:02 AM, Martin Peach wrote:
> >>
> >>? It's certainly possible to make a Pd patch that controls shift registers
> >>> through firmata. It's also possible to program the Arduino to do that and
> >>> send the switch numbers to a Pd patch that has a [comport] in it.
> >>>
> >>> Martin
> >>>
> >>>
> >>> On 2011-06-01 22:33, FernandoG wrote:
> >>>
> >>>> Thanks for answer
> >>>>
> >>>> Martin: I am researching about shift registers, but if the idea is to
> >>>> use puredata to control audio playbacks, thats means that i need to
> >>>> control shift registers with pd? because the arduino will be flashed
> >>>> with pd firmdata and will be imposible to upload code to control shift
> >>>> registers, is that posible or i am thinking wrong?
> >>>>? Thanks again
> >>>>
> >>>> Best!
> >>>>
> >>>>
> >>>> 2011/5/30 Martin Peach <martin.peach at sympatico.ca
> >>>> <mailto:martin.peach at sympatico.ca>>
> >>>>
> >>>>???On 2011-05-29 23:20, FernandoG wrote:
> >>>>
> >>>>? ? ???Hi
> >>>>? ? ???i need to design a sistem to control 40 diferents audio files and
> >>>>? ? ???playback in a stereo sistem. I was thinking to use puredata and
> >>>>? ? ???arduino,
> >>>>? ? ???load the 40 audios in a pd patch and use 40 switches and
> >>>>? ? ???resistors into
> >>>>? ? ???some arduino inputs to trigger and playback any of the 40 audios
> >>>>? ? ???in pd.
> >>>>? ? ???Every switch will be conected to a diferent resistor to? generate
> >>>>? ? ???diferents voltages then arduino inputs can diferenciate witch
> >>>>? ? ???audio to
> >>>>? ? ???playback. Also i need to power on a led any time a specific audio
> >>>> is
> >>>>? ? ???been playback. The 40 audios will not be playback simultanusly,
> >>>> but
> >>>>? ? ???probably al least 15 or 20 could be.
> >>>>
> >>>>? ? ???Anybody knows about a similar proyect? can i use analog input to
> >>>>? ? ???control
> >>>>? ? ???various samples or its not good idea? multiplexors? do i need to
> >>>>? ? ???use an
> >>>>? ? ???arduino mega or its not necesary?can i power 15-20 led
> >>>>? ? ???simultaneously?
> >>>>? ? ???the best way to do this system stable for long long time?
> >>>>
> >>>>
> >>>>???The analog input method is similar to the resistor ladder that
> >>>>???analog synthesizer keyboards used. Arduino analog inputs can
> >>>>???differentiate 1024 levels but the values of resistors are usually
> >>>>???5%, but 40 levels should be easy.
> >>>>???The best way to do LEDs is with shift registers. That way you can
> >>>>???use just 3 pins on? the Arduino to control as many LEDs as you like.
> >>>>???For LEDs use parallel-output shift registers, like the 74HC164. Also
> >>>>???the input could be done with parallel-load shift registers (for
> >>>>???example the 74HC165), but the resistor method is cheaper.
> >>>>???It should be quite stable over time.
> >>>>
> >>>>???Martin
> >>>>
> >>>>
> >>>>
> >>>>
> >>>> _______________________________________________
> >>>> Pd-list at iem.at mailing list
> >>>> UNSUBSCRIBE and account-management ->
> >>>> http://lists.puredata.info/listinfo/pd-list
> >>>>
> >>>
> >>>
> >>> _______________________________________________
> >>> Pd-list at iem.at mailing list
> >>> UNSUBSCRIBE and account-management ->
> >>> http://lists.puredata.info/listinfo/pd-list
> >>>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ----------------------------------------------------------------------------
> >>
> >> "Free software means you control what your computer does. Non-free
> >> software means someone else controls that, and to some extent controls
> >> you."
> >> - Richard M. Stallman
> >>
> >>
> >>
> >
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> <http://lists.puredata.info/pipermail/pd-list/attachments/20110622/060e7ec3/attachment-0001.htm>
>
> ------------------------------
>
> Message: 2
> Date: Wed, 22 Jun 2011 20:25:10 -0700
> From: Tyler Leavitt <thecryoflove at gmail.com>
> Subject: Re: [PD] Pd performance at TED
> To: Jonathan Wilkes <jancsika at yahoo.com>
> Cc: pd-list at iem.at
> Message-ID: <BANLkTiknLkskkdODJujbnAuPG_8+H9w_8Q at mail.gmail.com>
> Content-Type: text/plain; charset="iso-8859-1"
>
> http://www.youtube.com/watch?v=DP_w_Mvh9tU
>
> Is this a technological parody?
>
> On Wed, Jun 22, 2011 at 2:57 PM, Jonathan Wilkes <jancsika at yahoo.com> wrote:
>
> > Yes, it's exactly like that.? But that's the way the term was defined,
> > which-- as you
> > point out-- covers wide array of synthesis techniques and uses of digital
> > computers.
> >
> > I would just conclude that it doesn't seem a particularly enlightening
> > term, except for
> > a specific subset of parodies that have to do with technology.? As a term
> > of derision
> > I think it's confusing/confused.
> >
> > -Jonathan
> >
> > --- On *Wed, 6/22/11, ALAN BROOKER <alan.brooker2010 at gmail.com>* wrote:
> >
> >
> > From: ALAN BROOKER <alan.brooker2010 at gmail.com>
> >
> > Subject: Re: [PD] Pd performance at TED
> > To: "Jonathan Wilkes" <jancsika at yahoo.com>
> > Cc: pd-list at iem.at, "Cody Loyd" <codyloyd at gmail.com>
> > Date: Wednesday, June 22, 2011, 10:44 PM
> >
> >
> >
> >
> > On Wed, Jun 22, 2011 at 8:15 PM, Jonathan Wilkes
> > <jancsika at yahoo.com<http://mc/compose?to=jancsika@yahoo.com>
> > > wrote:
> >
> > You're right, no one ever said that.? Even me.
> >
> > Did you actually look at the patch?? It is a technological parody of record
> > scratching.
> > It perfectly fits the definition given on this list.? If you don't think
> > so, then
> > please tell me what you can do with that patch that's so musically
> > interesting that it
> > would warrant buying a modern digital computer instead of a turntable.
> >
> >
> > Well, one might want to connect the sampler patch to another patch that
> > produces a contrasting sound, they both would share the same values sent to
> > the atom to change pitches ect.
> >
> > Don't you think to say a patch that emulates scratching sounds from audio
> > samples is a technological parody of a scratching record player, is a bit
> > like saying a patch that emulates the sound of the piano is a technological
> > parody of a piano (they are both instruments)?. I think one purpose of audio
> > software to emulate instruments ?? Regarding if it is musically interesting,
> > I'm v. sure you know record scratching is(was?) used as an instrument in hip
> > hop and such.
> >
> > If a purpose of audio software is emulation of physical instruments? then I
> > don't think it should be? labeled as a technological parody.? Otherwise you
> > could use the argument 'why have a computer when I can buy a physical
> > instrument' every time?
> >
> >? Just sharing thoughts really, interesting topic.
> >
> >
> >
> > _______________________________________________
> > Pd-list at iem.at mailing list
> > UNSUBSCRIBE and account-management ->
> > http://lists.puredata.info/listinfo/pd-list
> >
> >
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> <http://lists.puredata.info/pipermail/pd-list/attachments/20110622/b1111355/attachment-0001.htm>
>
> ------------------------------
>
> Message: 3
> Date: Wed, 22 Jun 2011 22:41:57 -0700 (PDT)
> From: Jonathan Wilkes <jancsika at yahoo.com>
> Subject: Re: [PD] Pd performance at TED
> To: Tyler Leavitt <thecryoflove at gmail.com>
> Cc: pd-list at iem.at
> Message-ID:
> ??? <1308807717.42650.YahooMailClassic at web39408.mail.mud.yahoo.com>
> Content-Type: text/plain; charset="iso-8859-1"
>
> Certainly could be. :)
>
> Or on the other hand:
> http://www.youtube.com/watch?v=3cuuRG6-IT8
>
> -Jonathan
>
> --- On Thu, 6/23/11, Tyler Leavitt <thecryoflove at gmail.com> wrote:
>
> From: Tyler Leavitt <thecryoflove at gmail.com>
> Subject: Re: [PD] Pd performance at TED
> To: "Jonathan Wilkes" <jancsika at yahoo.com>
> Cc: "ALAN BROOKER" <alan.brooker2010 at gmail.com>, pd-list at iem.at
> Date: Thursday, June 23, 2011, 5:25 AM
>
> http://www.youtube.com/watch?v=DP_w_Mvh9tU
> Is this a technological parody?
>
> On Wed, Jun 22, 2011 at 2:57 PM, Jonathan Wilkes <jancsika at yahoo.com> wrote:
>
> Yes, it's exactly like that.? But that's the way the term was defined, which--
> as you
>
> point out-- covers wide array of synthesis techniques and uses of digital
> computers.
>
> I would just conclude that it doesn't seem a particularly enlightening term,
> except for
> a specific subset of parodies that have to do with technology.? As a term of
> derision
>
> I think it's confusing/confused.
>
> -Jonathan
>
> --- On Wed, 6/22/11, ALAN BROOKER <alan.brooker2010 at gmail.com> wrote:
>
>
> From: ALAN BROOKER <alan.brooker2010 at gmail.com>
> Subject: Re: [PD] Pd performance at TED
> To: "Jonathan Wilkes" <jancsika at yahoo.com>
>
> Cc: pd-list at iem.at, "Cody Loyd" <codyloyd at gmail.com>
> Date: Wednesday, June 22, 2011,
>? 10:44 PM
>
>
>
> On Wed, Jun 22, 2011 at 8:15 PM, Jonathan Wilkes <jancsika at yahoo.com> wrote:
>
>
> You're right, no one ever said that.? Even me.
>
> Did you actually look at the patch?? It is a technological parody of record
> scratching.?
>
>
> It perfectly fits the definition given on this list.? If you don't think so,
> then
> please tell me what you can do with that patch that's so musically interesting
> that it
> would warrant buying a modern digital computer instead of a turntable.
>
>
>
>
> Well, one might want to connect the sampler patch to another patch that
> produces a contrasting sound, they both would share the same values sent to
> the atom to change pitches ect.
>
>
> Don't you think to say a patch that emulates scratching sounds from audio
> samples is a?technological parody of a scratching record player, is a bit like
> saying a patch that emulates the sound of the?piano?is a technological parody
> of a piano (they are both instruments)?. I think one purpose of audio software
> to emulate instruments ? ?Regarding if it is musically interesting, I'm v.
> sure you know record scratching is(was?) used as an instrument in hip hop and
> such.
>
>
> If a purpose of audio software is emulation of physical instruments ?then I
> don't think it should be ?labeled as a technological parody. ?Otherwise you
> could use the argument 'why have a computer when I can buy a physical
> instrument' every time??
>
>
> ?Just sharing thoughts really,?interesting?topic.
>
>
>
>
> _______________________________________________
>
> Pd-list at iem.at mailing list
>
> UNSUBSCRIBE and account-management ->
> http://lists.puredata.info/listinfo/pd-list
>
>
>
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> <http://lists.puredata.info/pipermail/pd-list/attachments/20110622/8c452e64/attachment.htm>
>
> ------------------------------
>
> _______________________________________________
> Pd-list mailing list
> Pd-list at iem.at
> to manage your subscription (including un-subscription) see
> http://lists.puredata.info/listinfo/pd-list
>
>
> End of Pd-list Digest, Vol 75, Issue 88
> ***************************************
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.puredata.info/pipermail/pd-list/attachments/20110623/f50274c9/attachment.htm>

------------------------------

_______________________________________________
Pd-list mailing list
Pd-list at iem.at
to manage your subscription (including un-subscription) see
http://lists.puredata.info/listinfo/pd-list


End of Pd-list Digest, Vol 75, Issue 91
***************************************
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.puredata.info/pipermail/pd-list/attachments/20110625/1b463677/attachment-0001.htm>


More information about the Pd-list mailing list