[PD] Raspberry Pi versus BeagleBoard ?

[Quim Llimona]

Hi all,

We'll present the RPi version of the Satellite in a lab at TEI'13 (
http://www.tei-conf.org/13/studios, studio 2), which is basically a reduced
version of that workshop. So, I guess the distro will be available by then,
in 5 weeks.

Quim


2012/12/20 Hans-Christoph Steiner <hans at at.or.at>

>
> One thing to remember with all these boards is that ARM boards are not
> PCs.  That means that they are not easily interchangeable.  There is not
> standardized techniques for booting, for example.  That means you better be
> sure you can get the distro that you want running on that board.  A Debian
> image running on a Beagleboard most likely will not boot on a RPi or the
> MK808.
>
> .hc
>
> On Dec 20, 2012, at 10:36 AM, Charles Goyard wrote:
>
> > Hi,
> >
> > just so people know, there is some hardware, not open, but way more
> > powerful available for cheap: look for "MK808 tv box" on geekbuying.
> > Dual arm cortex A9 running Android, 1GB ram, at less than 60USD.
> >
> > Maybe can pd runs on these.
> >
> > Pierre Massat wrote:
> >> Dear List,
> >>
> >> I came accross this "Stompbox design workshop" (
> >> https://ccrma.stanford.edu/wiki/Stompbox_2011). They use Pd on a
> >> beagleboard to make stompboxes.
> >> They talk about the older version of the beagleboard with a CPU running
> at
> >> around 700 MHz. This is the same speed as the RPi's.
> >
> > _______________________________________________
> > Pd-list at iem.at mailing list
> > UNSUBSCRIBE and account-management ->
> http://lists.puredata.info/listinfo/pd-list
>
>
> _______________________________________________
> Pd-list at iem.at mailing list
> UNSUBSCRIBE and account-management ->
> http://lists.puredata.info/listinfo/pd-list
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.puredata.info/pipermail/pd-list/attachments/20130102/ffb3cf05/attachment.htm>