[PD] Arduino/Raspberry comport issue

[kubriel]

baud rate _should_ be the same in your arduino code and in your comport 
object, otherwise you get messed up characters.
i dont have rpi here, but i didnt noticed any chenges between running 
comport on rpi, or standard pc.
when you send [devices( you usually get list of connected serial devices 
- arduinos with usb2serial and com ports if you have.

also check, ig your user is in uucp group, i think it is necessary,
and maybe also dialout group can be important. probably it depense if 
you are using debian fedora or arch on this rpi

kub


On 11.11.2013 18:13, Alexandros Drymonitis wrote:
> Are you sure the baud rate you set to [comport] is the same as the 
> code you load on your Arduino? That could be a problem..
> If you send the [devices( message to [comport] what do you get in the 
> console?
>
>
> On Mon, Nov 11, 2013 at 11:19 AM, kubriel <kubriel at servus.at 
> <mailto:kubriel at servus.at>> wrote:
>
>
>         It won?t receive data.
>
>     Hi! i was using RPi plenty of times headless without any problems
>     with comport in pd, but usually running armarch linux.
>     but i was not using device name, but device nr, like [comport 0
>     9600] for uno, or [comport 4 9600] for duemilanove.
>
>     kub
>
>     -- 
>     http://kubriel.servus.at
>
>
>     _______________________________________________
>     Pd-list at iem.at <mailto:Pd-list at iem.at> mailing list
>     UNSUBSCRIBE and account-management ->
>     http://lists.puredata.info/listinfo/pd-list
>
>

-- 
http://kubriel.servus.at

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.puredata.info/pipermail/pd-list/attachments/20131112/183189da/attachment.htm>