[PD] Pduino issue

[Roman Haefeli]

On Tue, 2023-04-18 at 14:29 +0200, rolfm at dds.nl wrote:
>  
> in my experience using a multimeter to test the working of pins on an
> Arduino
> is not always giving what you expect.
> i suggest to use e.g. a led to see if pins are on or off.

Actually, if the pins are set to 'output' mode, I don't see a reason
not to trust a multimeter (assuming it is set to measure voltage).

Roman
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 488 bytes
Desc: This is a digitally signed message part
URL: <http://lists.puredata.info/pipermail/pd-list/attachments/20230418/50a44b74/attachment.sig>