[PD] Can't get PD/RME9652 even close to working
Winfried Ritsch
ritsch at iem.kug.ac.at
Wed Aug 29 14:01:56 CEST 2001
hello,
>
> (System: Red Hat 7.1 - kernel 2.4.2. Using the PD 0.33P2 RPM.)
>
> The rme96xx module doesn't install cleanly. "make install" seems broken
> due to a macro fault in the Makefile:
>
[...]
better use a kernel > 2.4.5, since there should be the sound/
[...]
> Tried building PD from source, specifying --enable-rme.
> So tried "pd -rme" which gives:
>
compile pd without the rme enable and start it without -rme flag,
since the flag -rme is only for the rme9652 driver for kernels 2.2.x
with eg. -inchannels 8 -outchannels 8
now it should work (use rmectl utility to check the card status,
should be synced when using )
mfg winfried
More information about the Pd-list
mailing list