[PD] ASIO support

[Miller Puckette]

This is exciting... I'll try this and see if it helps.

As to multichannel, this will require rewriting pablio.c in 
pd\portaudio\pablio\.  I don't think it will be hard, but I'll need to
get my platform working before I can test it...

cheers
Miller

On Wed, Mar 13, 2002 at 07:24:34PM +0100, Johannes Taelman wrote:
> Hi!
> 
> I've got it running with the RME Hammerfall DSP PCI card. OK this card is
> not the same as the older Hammerfall PCI, but I think it is very similar.
> Still using 256 samples buffer. I needed to set the sDefaultOutputDeviceID
> and sDefaultInputDeviceID to 1 on this machine, but I had to use 2 on some
> other machines. The default 0 was the directx or mme asio wrapper on all
> the machines I tested, and always skipped buffers.
> 
> The diagnostic output in Test14 helps choosing the right one. Command-line
> configuration would make it usable without compiler. Still missing
> multi-channel support. I'll look at that tonight, hints on where to look
> are very welcome.
> 
> Johannes
> 
> On Wed, 13 Mar 2002, Miller Puckette wrote:
> >
> > I haven't actually seen it run with ASIO (I have an RME Hammerfall PCI; nobody
> > seems to be able to use that one with Pd&ASIO yet...)