[PD] problems with Delta 1010LT?

[info at timvets.net]

> My problem has been solved by running alsamixer with flags to
Delta-1010LT, and raising input levels there. So, if indeed you (tim)
have exactly the same problem, then this should solve it.

Hi Jaime,

when running alsamixer like this:
alsamixer -D hw:1
I can set the adc sliders for the Delta-1010LT from there.
problem solved, thanks!

Tim

>
>
> J
>
>
>
>
> On Sun, Nov 9, 2008 at 10:30 AM, Miller Puckette
<mpuckett at imusic1.ucsd.edu> wrote:
> Wierd.  I have out-of-the-box Fedora 9 running (it's a terrible Fedora
>         release, by hte way, I'm going to switch to 10 when it comes out
later
>         this month) and my delta1010LT runs fine.  So if it's an ALSA
bug it
>         must have been fixed meanwhile.
>
>         BTW, there are 4 jumpers on the 1010LT card; if they are missing
the first
>         two inputs might not work (but the other 6 should anyway.)
>
>         cheers
>         Miller
>
>
>         On Sun, Nov 09, 2008 at 04:56:48PM +0100, tim wrote:
>         > hello Jamie and list,
>         >
>         > exact same problem here.
>         > Delta1010LT outputs work, inputs don't.
>         > I tried on ubuntu hardy and pure:dyne.
>         > I checked all there is to check in envy24 control.
>         > btw, There are also other problems showing up with alsa lately.
>         > For example, the Echo Layla 3G stopped working altogether.
>         > I'll try Bryan's suggestions later...
>         >
>         > Tim
>         >
>         > On Sun, 2008-11-09 at 12:36 +0100, Bryan Jurish wrote:
>         > > morning Jaime,
>         > >
>         > > I have the same card in my desktop here under debian
testing/unstable,
>         > > and have also successfully used all the analog in- and
outputs with pd.
>         > >
>         > > The only potential causes for your problem that occur to me
are "stupid"
>         > > ones that you've probably already checked, e.g. routing
problems on the
>         > > card [have you run "envy24control" and checked that the
input levels
>         > > (tab page "analog volume") are all up where they should be?]
 Did you
>         > > start pd with "-channels 8"?
>         > >
>         > > I also vaguely remember hearing of problems with the alsa
mixer API
>         > > (alsamixer, amixer, etc.) for envy24 cards -- the
conventional wisdom
>         > > seems to be: "avoid ALSA's mixer and use only envy24control
for this
>         > > card".  You might also check whether your distro is doing
something
>         > > sneaky like calling "amixer" behind your back when the
driver module
>         > > (snd_ice1712) is loaded (e.g. as a post-install operation
declared in
>         > > /etc/modules.conf)... other than that, I'm pretty much out
of ideas...
>
>
> I haven't found any file /etc/modules.conf, but I did find /etc/asound.conf
>
>
> #SWCONF
> #DEV 0
> defaults.pcm.card 0
> defaults.pcm.device 0
> defaults.ctl.card 0
>
>
>
>
>         > >
>         > > marmosets,
>         > >     Bryan
>         > >
>         > > On 2008-11-09 09:06:25, "Jaime Oliver"
<jaime.oliver2 at gmail.com> appears
>         > > to have written:
>         > > > Hello all,
>         > > >
>         > > > I have an M-Audio Delta 1010LT in Fedora 8. I never
installed any
>         > > > drivers since it seemed to work right out of the box. I
have managed to
>         > > > use the 8 channels OUT, but can't get a signal into pd in
any of the 8
>         > > > channels IN. Has anyone else seen something like this?
>         > > >
>         > > > best,
>         > > >
>         > > > J
>         > > >
>         > > > --
>         > > > Jaime E Oliver LR
>         > > >
>         > > > joliverl at ucsd.edu <mailto:joliverl at ucsd.edu>
>         > > > www.realidadvisual.org/jaimeoliver
>         > > > <http://www.realidadvisual.org/jaimeoliver>
>         > > > www-crca.ucsd.edu/ <http://www-crca.ucsd.edu/>
>         > > > www.realidadvisual.org <http://www.realidadvisual.org>
>         > > >
>         > > > 858 202 1522
>         > > > 9168 Regents Rd. Apt. G
>         > > > La Jolla, CA 92037
>         > > > USA
>         > >
>         > --
>         > ...................................
>         > www.timvets.net
>         > info at timvets.net, timvets at gmail.com
>         > 0032 474 89 66 86
>         > skype: tim167_
>         > ...................................
>         >
>         >
>
>         > _______________________________________________
>         > Pd-list at iem.at mailing list
>         > UNSUBSCRIBE and account-management ->
http://lists.puredata.info/listinfo/pd-list
>
>         _______________________________________________
>         Pd-list at iem.at mailing list
>         UNSUBSCRIBE and account-management ->
http://lists.puredata.info/listinfo/pd-list
>
>
>
> --
> Jaime E Oliver LR
>
> joliverl at ucsd.edu
> www.realidadvisual.org/jaimeoliver
> www-crca.ucsd.edu/
> www.realidadvisual.org
>
> 858 202 1522
> 9168 Regents Rd. Apt. G
> La Jolla, CA 92037
> USA
>
> --
...................................
www.timvets.net
info at timvets.net, timvets at gmail.com
0032 474 89 66 86
skype: tim167_
...................................