[PD] arduino and digital outputs

[Ricardo Lameiro]

I also forgot to mention that this issue was mentioned on this list before.

there is a link for a firmata firmware made for the mega from the made by
the teensy guy.

http://www.pjrc.com/tmp/firmata/

check the list in here
http://www.mail-archive.com/pd-list@iem.at/msg31148.html


2010/5/19 Ricardo Lameiro <ricardolameiro at gmail.com>

> As far as I know, the pduino is not made for the arduino mega. so it could
> work, but you need to test it out. also the firmata firmware would need also
> some tweak since the mega has more outputs/inputs and analog ports
>
> 2010/5/19 Andres Ferrari <anfex at yahoo.com>
>
>> hello,
>> When I use the abstraction [arduino] or [comport] object
>> the numbers of the digital outputs (pins) of the arduino hardware
>> don't match with the output's numbers of the patch.
>>
>> for example, when i send 1 to digital output "12" from puredata the led
>> connected to digital out 12 don't turn on but ...but turn on in digital out
>> "14"...
>>
>> only works pins from 10- 13 but 0- 9 dont't work.
>>
>> When I've tested from the arduino's software with a sketch there aren't
>> any problem, all works fine.
>>
>> Is it a [comport]r  or  "Firmata" problem?
>> I have osx 10.5 and arduino mega.
>>
>> Any suggestions?.....thanks a lot!!!
>>
>>
>> Andrés Ferrari G.
>>
>> http://www.myspace.com/anfex
>>
>>
>> _______________________________________________
>> Pd-list at iem.at mailing list
>> UNSUBSCRIBE and account-management ->
>> http://lists.puredata.info/listinfo/pd-list
>>
>>
>
>
> --
> Fagote / Contrafagote
> Bassoon / Contra-bassoon
> http://myspace.com/ricardolameiro
>



-- 
Fagote / Contrafagote
Bassoon / Contra-bassoon
http://myspace.com/ricardolameiro
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.puredata.info/pipermail/pd-list/attachments/20100519/9b8ce8fa/attachment.htm>