[PD] pix_freenect update

Mon Jan 23 22:50:35 CET 2012

Hmm the only idea i have is probably that some file isn't in the right
place, but I don't know which file nor where it should go.  Maybe its
the /sw/etc/primesense/Features_1_5_2 folder?

.hc

On Mon, Jan 23, 2012, at 23:11, Matthias Kronlachner wrote:
> thanks hans, rgb, depth and hand tracking are now working with the fink 
> version of OpenNI.
> but does skeleton work for you?
> "NiSimpleSkeleton"
> says Find user generator failed: Error!
> 
> the same for pix_openni external.
> when i link pix_openni against the openni version i installed manually 
> skeleton is working.
> 
> with "niReg -l" you can check witch OpenNI modules are registered. 
> skeleton is showing up but still it's somehow not working.
> do you have an idea?
> 
> matthias
> 
> Am 23.01.12 04:04, schrieb Hans-Christoph Steiner:
> >
> > Ok, I got the NiViewer working on my machine!  I checked in an updated 
> > libusb1 (1.0.9-rc3) into Fink/unstable, and that was the last step to 
> > getting it working.
> >
> > .hc
> >
> > On Jan 22, 2012, at 4:08 PM, Matthias Kronlachner wrote:
> >
> >> Ah thanks, you have to install sed before trying to install openni.
> >>
> >> fink install sed
> >> and then
> >> fink install primesense-nite openni-sensor-avin2-sensorkinect
> >>
> >> pix_openni compiled successfully against fink version of openni and 
> >> initialisation is also working for pix_openni.
> >> but anyway i don't get an image or depth stream.
> >> i will try again tomorrow.
> >>
> >> it's definitely much more comfortable to install openni, nite and 
> >> sensorkinect via fink, thanks hans!
> >>
> >> matthias
> >>
> >>
> >> Am 22.01.12 22:08, schrieb Hans-Christoph Steiner:
> >>>
> >>> Ah, ok, try this:
> >>>
> >>> fink install sed primesense-nite openni-sensor-avin2-sensorkinect
> >>>
> >>> .hc
> >>>
> >>> On Jan 22, 2012, at 2:04 PM, Matthias Kronlachner wrote:
> >>>
> >>>> hi hans!
> >>>>
> >>>> thanks, but installing openni via fink still doesn't work for me.
> >>>> i attached the logfile.
> >>>>
> >>>> i did selfupdate and cleanup before.
> >>>>
> >>>> does it work for someone else??
> >>>>
> >>>> matthias
> >>>>
> >>>> Am 21.01.12 05:03, schrieb Hans-Christoph Steiner:
> >>>>>
> >>>>> Another Fink update, I just added the avin2 driver, so now the 
> >>>>> recommended setup for the Kinect is:
> >>>>>
> >>>>> fink install primesense-nite openni-sensor-avin2-sensorkinect
> >>>>>
> >>>>> .hc
> >>>>>
> >>>>> On Jan 20, 2012, at 7:06 AM, Matthias Kronlachner wrote:
> >>>>>
> >>>>>> hi!
> >>>>>>
> >>>>>> i tried to install openni from fink but got an error.
> >>>>>> -> see attachment.
> >>>>>>
> >>>>>> i did fink selfupdate and fink update-all before.
> >>>>>>
> >>>>>> don't know how to fix that. maybe you can help.
> >>>>>> if i can manage to install openni + sensorkinect via fink i will 
> >>>>>> build it against the package and include it to the install 
> >>>>>> instructions.
> >>>>>>
> >>>>>> matthias
> >>>>>>
> >>>>>>
> >>>>>> Am 19.01.12 19:23, schrieb Hans-Christoph Steiner:
> >>>>>>>
> >>>>>>> This is great, I'm going to try to use this in my Dataflow class 
> >>>>>>> at ITP/NYU.  I'm currently updating the openni/primesense 
> >>>>>>> packaging for Debian and Ubuntu and am packaging for Mac OS 
> >>>>>>> X/Fink.  It would be awesome if you could try to build against 
> >>>>>>> the packaging.
> >>>>>>>
> >>>>>>> (these should be showing up soon)
> >>>>>>> http://pdb.finkproject.org/pdb/package.php/openni
> >>>>>>> http://pdb.finkproject.org/pdb/package.php/openni-sensor-primesense
> >>>>>>>
> >>>>>>> I'm pushing my Debian packaging to the git repos on Debian 
> >>>>>>> pkg-multimedia.  As I get things working, I'll post binary 
> >>>>>>> packages to this PPA:
> >>>>>>>
> >>>>>>> https://launchpad.net/~eighthave/+archive/openni 
> >>>>>>> <https://launchpad.net/%7Eeighthave/+archive/openni>
> >>>>>>>
> >>>>>>> .hc
> >>>>>>>
> >>>>>>> On Jan 11, 2012, at 8:48 AM, Matthias Kronlachner wrote:
> >>>>>>>
> >>>>>>>> you're welcome.
> >>>>>>>>
> >>>>>>>> if you get this issue with permissions to usb device place the 
> >>>>>>>> udev rule into /etc/udev/rules.d
> >>>>>>>> see: 
> >>>>>>>> https://github.com/OpenKinect/libfreenect/tree/master/platform/linux/udev
> >>>>>>>>
> >>>>>>>> but it still has this error when using freenect with audio support.
> >>>>>>>> so a temporal fix can be
> >>>>>>>> sudo chmod 777 /dev/bus/usb/001/026
> >>>>>>>> -> that id changes every time...
> >>>>>>>>
> >>>>>>>> maybe someone found a way to permanently add the rule... i 
> >>>>>>>> tried but couldn't manage to get it working without setting the 
> >>>>>>>> chmod manually.
> >>>>>>>>
> >>>>>>>> matthias
> >>>>>>>>
> >>>>>>>> Am 10.01.12 16:21, schrieb olsen:
> >>>>>>>>> ej matthias
> >>>>>>>>>
> >>>>>>>>> vielen dank für diese Externals!
> >>>>>>>>> wie hast n du das mit den permissions auf das device geregelt?
> >>>>>>>>> ich bekomm als user folgenden errör:
> >>>>>>>>>
> >>>>>>>>> libusb couldn't open USB device /dev/bus/usb/001/026: 
> >>>>>>>>> Permission denied.
> >>>>>>>>> libusb requires write access to USB device nodes.
> >>>>>>>>> libusb couldn't open USB device /dev/bus/usb/001/024: 
> >>>>>>>>> Permission denied.
> >>>>>>>>> libusb requires write access to USB device nodes.
> >>>>>>>>>
> >>>>>>>>> danks für info & gruss
> >>>>>>>>> olsen
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>> On 01/09/2012 09:26 AM, Matthias Kronlachner wrote:
> >>>>>>>>>> i added a small external that allows to control motor/led of 
> >>>>>>>>>> Kinect and can output the accelerometer data via libfreenect.
> >>>>>>>>>>
> >>>>>>>>>> you can use this in combination to pix_openni.
> >>>>>>>>>> get it here:
> >>>>>>>>>>
> >>>>>>>>>> https://github.com/kronihias/freenect
> >>>>>>>>>>
> >>>>>>>>>> just the audio external with resampling included missing.... 
> >>>>>>>>>> somebody willing to help?
> >>>>>>>>>>
> >>>>>>>>>> matthias
> >>>>>>>>>>
> >>>>>>>>>> Am 09.01.12 07:21, schrieb Budi Prakosa:
> >>>>>>>>>>> awesome!!
> >>>>>>>>>>>
> >>>>>>>>>>> On Mon, Jan 9, 2012 at 8:18 AM, Matthias Kronlachner
> >>>>>>>>>>> <m.kronlachner at student.tugraz.at> wrote:
> >>>>>>>>>>>> hello again!
> >>>>>>>>>>>>
> >>>>>>>>>>>> if you want to use skeleton data and hand tracking (similar 
> >>>>>>>>>>>> to OSCeleton)
> >>>>>>>>>>>> combined with rgb and depth streams from Kinect Sensor you 
> >>>>>>>>>>>> can do this with
> >>>>>>>>>>>> the new pix_openni external. get it here:
> >>>>>>>>>>>>
> >>>>>>>>>>>> https://github.com/kronihias/pix_openni
> >>>>>>>>>>>>
> >>>>>>>>>>>> binaries for osx in build folder.
> >>>>>>>>>>>> you will need to install OpenNI, NITE and SensorKinect -> 
> >>>>>>>>>>>> see README
> >>>>>>>>>>>>
> >>>>>>>>>>>> initialization of openni and nodes needs some time and pd 
> >>>>>>>>>>>> freezes - keep
> >>>>>>>>>>>> that in mind!
> >>>>>>>>>>>> i hope it's stable, i haven't tested it excessively now.
> >>>>>>>>>>>>
> >>>>>>>>>>>> currently it supports just 1 kinect sensor. i don't have 
> >>>>>>>>>>>> access to two
> >>>>>>>>>>>> cameras in the near future so help would be appreciated.
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>> matthias
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>> Am 05.01.12 09:17, schrieb Matthias Kronlachner:
> >>>>>>>>>>>>
> >>>>>>>>>>>> hi everybody!
> >>>>>>>>>>>>
> >>>>>>>>>>>> i did a update to my pix_freenect external for kinect and 
> >>>>>>>>>>>> moved it into a
> >>>>>>>>>>>> git repo.
> >>>>>>>>>>>> get it here: http://github.com/kronihias/pix_freenect
> >>>>>>>>>>>>
> >>>>>>>>>>>> ready to use binaries for osx (including 
> >>>>>>>>>>>> libusb&libfreenect) are in the
> >>>>>>>>>>>> build folder.
> >>>>>>>>>>>>
> >>>>>>>>>>>> major improvements:
> >>>>>>>>>>>> * open specific Kinect sensor by serial number, not only by 
> >>>>>>>>>>>> id (that may
> >>>>>>>>>>>> change every time pd is restarted) – useful for multiple 
> >>>>>>>>>>>> Kinect
> >>>>>>>>>>>> installations
> >>>>>>>>>>>> * output registered depthmap -> rgb and depth images are 
> >>>>>>>>>>>> aligned (less
> >>>>>>>>>>>> offset between those two pictures - depending on distance)
> >>>>>>>>>>>> * output depthmap directly as millimeter values (16 bit in 
> >>>>>>>>>>>> red& green
> >>>>>>>>>>>> channels)
> >>>>>>>>>>>> * resolution of rgb image can be set to 1280×1024
> >>>>>>>>>>>>
> >>>>>>>>>>>> i also added a folder with examples - currently just one 
> >>>>>>>>>>>> but i hope there
> >>>>>>>>>>>> will come more soon....
> >>>>>>>>>>>>
> >>>>>>>>>>>> have fun.
> >>>>>>>>>>>>
> >>>>>>>>>>>> matthias
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>> _______________________________________________
> >>>>>>>>>>>> Pd-list at iem.at mailing list
> >>>>>>>>>>>> UNSUBSCRIBE and account-management ->
> >>>>>>>>>>>> http://lists.puredata.info/listinfo/pd-list
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>> _______________________________________________
> >>>>>>>>>>>> Pd-list at iem.at mailing list
> >>>>>>>>>>>> UNSUBSCRIBE and account-management ->
> >>>>>>>>>>>> http://lists.puredata.info/listinfo/pd-list
> >>>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>> _______________________________________________
> >>>>>>>>>> Pd-list at iem.at mailing list
> >>>>>>>>>> UNSUBSCRIBE and account-management -> 
> >>>>>>>>>> http://lists.puredata.info/listinfo/pd-list
> >>>>>>>>>>
> >>>>>>>>>
> >>>>>>>>
> >>>>>>>> _______________________________________________
> >>>>>>>> Pd-list at iem.at <mailto:Pd-list at iem.at> mailing list
> >>>>>>>> UNSUBSCRIBE and account-management -> 
> >>>>>>>> http://lists.puredata.info/listinfo/pd-list
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>> ----------------------------------------------------------------------------
> >>>>>>>
> >>>>>>> Computer science is no more related to the computer than 
> >>>>>>> astronomy is related to the telescope.      -Edsger Dykstra
> >>>>>>>
> >>>>>>>
> >>>>>>
> >>>>>> <fink_openni_log.txt>
> >>>>>
> >>>>>
> >>>>>
> >>>>> ----------------------------------------------------------------------------
> >>>>>
> >>>>> "Making boring techno music is really easy with modern tools, but 
> >>>>> with live coding, boring techno is much harder." - Chris McCormick
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>
> >>>> <fink-build-log_openni_1.5.2.23-4_2012.01.22-20.51.48>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>> ----------------------------------------------------------------------------
> >>>
> >>> "[T]he greatest purveyor of violence in the world today [is] my own 
> >>> government." - Martin Luther King, Jr.
> >>>
> >>>
> >>>
> >>
> >
> >
> >
> > ----------------------------------------------------------------------------
> >
> > Mistrust authority - promote decentralization.  - the hacker ethic
> >
> >
> 
> 