[PD] can i bypass comport?
Martin Peach
martin.peach at sympatico.ca
Fri Nov 30 23:03:07 CET 2012
Better to use [tcpclient] / [tcpserver] or [udpreceive] / [udpsend].
A single [tcpserver] or [tcpclient] can send and receive.
Martin
On 2012-11-30 16:45, onyx at onyx-ashanti.com wrote:
> Ok, so i got the [tcpsend]to work. i connected it at the point where
> the comport would usually get info. it is connected to the ip
> xxx.xxx.xxx.xxx 3000 and when i turn the patch on, it sends the
> appropriate data to the arduino fio/rn-xv over wifi. the problem now is
> that the [tcpreceive 3000] isnt receiving anything. from what i have
> read, tcpsen and tcp recieve work on the same port so if that port is an
> ip address, what would be the prefered means of getting the data from
> the fio?
>
> I am experimenting with port forwarding on my router right now. Is
> there anything you might know of that i could/should try, that might
> sort the port conflict out?
>
> cheers,
>
> Onyx
>
> On Mon, Nov 26, 2012 at 4:33 PM, onyx at onyx-ashanti.com
> <mailto:onyx at onyx-ashanti.com> <onyxashanti at gmail.com
> <mailto:onyxashanti at gmail.com>> wrote:
>
> I am going to investigate the updated wifly, wiflyserial and
> ethernet libraries onto the sketch for the rn-xv/arduino. this
> should allow me create a "serial socket" or something, once i grasp
> all that stuff a bit better. tcpclient, in place of [comport]
> connects and shows data sent but nothing is happening in pd or the
> arduino fio. i have begun toying with udpsend/udprecieve but that
> isnt working because i am sure that i havent connected the i/o in a
> manner that provides [comport] replacement functionality. i should
> have some results from that shortly. from what i have read, the way
> udp works might be better and if i can get one of the above
> libraries to see it, maybe my problem will be solved. i will let
> you what i come with in a few hours
>
>
> On Sun, Nov 25, 2012 at 10:59 PM, Martin Peach
> <martin.peach at sympatico.ca <mailto:martin.peach at sympatico.ca>> wrote:
>
> On 2012-11-25 15:51, onyx at onyx-ashanti.com
> <mailto:onyx at onyx-ashanti.com> wrote:
>
> if comport could accept an ip port argument, as well as a
> serial port
> argument, all would be lovely and nothing would have to
> change. it
> would simply recieve itsport from the ip. is there anything
> like this?
>
>
> In pd-extended there are [udpsend] and [udpreceive] as well as
> [tcpclient] and [tcpserver] that can be used instead of [comport].
> Probably you'll need to add a [import net] to get them.
>
> Martin
>
>
>
>
> --
> www.onyx-ashanti.com <http://www.onyx-ashanti.com>
>
>
>
>
>
>
> --
> www.onyx-ashanti.com <http://www.onyx-ashanti.com>
>
>
>
>
>
> _______________________________________________
> Pd-list at iem.at mailing list
> UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list
>
More information about the Pd-list
mailing list