[PD] comport error

[Peter Venus]

Hello

i think it would be helpful, if you could attach the abstraction.
also, it would be helpful to know, where the abstraction (convert.ascii)
is from, as it seems not to be part of pd-extended.



cheers, peter

Am 26.09.13 00:39, schrieb Paula Pin:
> hi everyone ! !
>
> the comport is woorking now thanks Ale for the solution, now I have only
> this problem
>
> ascii4pd.txt: can't open
> ascii4pd.txt: read failed
>
> the abstraction convert.ascii.pd  looks not work on the actual
> configuration ....
>
> inside this there is a mensage that is not working ascii4pd.txt
>
> someone has the same problem or know some solution to this
>
>
> thanks a lot
>
>
>
>
> 2013/9/25 Charles Goyard <cg at fsck.fr>
>
>> Hi,
>>
>> Paula Pin wrote:
>>>
>>> [comport] ** WARNING ** port 9600 not valid, must be between 0 and 98
>>> [comport] opening serial port 9600 failed!
>>> [comport]: available serial ports:
>>>      0    /dev/ttyACM0
>>> [comport] opened serial line device 0 (/dev/ttyACM0)
>>
>> It looks like you mixed the order of parameters.
>>
>> Try inverting the speed (9600) and the port number.
>>
>> What are the exact parameters you give to comport ?
>>
>>
>> _______________________________________________
>> Pd-list at iem.at mailing list
>> UNSUBSCRIBE and account-management ->
>> http://lists.puredata.info/listinfo/pd-list
>>
>
>
>
>
>
> _______________________________________________
> Pd-list at iem.at mailing list
> UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list
>